Ways to Replace Old Brake Discs with New Ones

These days, all the modern cars comprise of front brakes. These are often termed as brake discs and help in providing around 80% of stopping power. Therefore, these brakes have the tendency to wear off faster than usual. Many at times, you may have to repair the old and worn out rotors, pads and calipers with new ones, just for the sake of increasing the working values of the car’s brakes. It is recommended to contact an expert to help you with the replacement services, and they will charge a flat fee for their services. Sometimes, it is really important to know these steps on your own, if you don’t have the opportunity to call an expert. You get to save some bucks and cover your tasks too. 

Brake Discs

Signs to replace the discs:  

There are some significant signs, which will warn you that the time has come to replace old brake discs with the new ones. As properly functional brakes are rather mandatory for a safe drive, it is important to identify the signs when it is time to replace discs. 

• The sure sign is when the brake is making high-pitched screech when you apply pressure on it. It indicates that the brake pads have worn out. These pads are made out of metal like discs and should be replaced with the discs too. 

• There is another way to check if the car’s brake discs are said to be changed, and that is by going through spokes on a wheel. In case the brake pad is less than a quarter inch thick, then the time has come to replace it with the discs. 

Be sure of the tools you need: 

Before you start with the replacement of brake discs, it is time to be sure of the tools and parts that you will need. There are mainly two bolts used for holding the calliper to pad bracket. You will need metric sizes and SAW sockets and wrenches with bleeder screw wrenches. Moreover, you will further need set of hex or star key wrenches and socket set. 

Brake Discs

Now for the steps: 

Be sure of the steps when you try to replace the worn-out brake discs with new ones. When you are sure of the steps, you won’t need help from anyone else. 

• You need to loose nuts on wheels before jacking it off grounds. 

• After raising the car safely and securely with the help of jack, you have to take the wheels off. That will give you full access to the discs now. 

• In case, these brake discs are on calipers, then you might have to remove the same from bracket.  After removing it, remember to hung it out of your site to avoid creating obstructions. 

• Now, you have to take the fixture off, also termed as carrier. Once you are through with the caliper and carrier, you will get direct contact to the discs now. You now have to remove the old one by removing some screws. 

• Once you managed to take the stubborn screws off from the old brake discs, now you can just slide the old disc from its old position and get working with the new one. 

• Slide the new disc into its place and screw it on. If you are trying to use the same old screws, do not forget to inspect it before it gets too late. 

• Bolt the caliper and replace wheel, and you are done! 

The entire process of brake discs is not really difficult to complete on your own, but it is mostly recommended to contact a trained expert for help. Just be sure to get along with the best help from the selected team.