Important Tips for Laying of Paths Using Crazy Paving

Crazy paving has been one of the best ways of setting a path, be it in the garden or outer rooms or even in footpaths. This type of paving is known as random paving and it is quite easy to maintain and affordable to put together.

This type of paving doesn’t require high accuracy and even the broken pieces can be used for further work. This is what makes it one of the easiest ways of laying out the paths at any place. Though it employs more labour, it is way easier than traditional methods of making pavements. Here, we are mentioning some points to guide you regarding how to lay crazy paving. Have a look.

Crazy Paving for Path

Follow the following points in order to lay crazy paving, which is enumerated as follows:

1. First of all, mark the area that has to be paved with the help of crazy paving method.
2. After that, dig out the area by removing the topsoil.
3. Then, set the falls out.
4. Now, make the area up to the level and then make it compact.
5. Before finalizing it, set out the pieces to see how they fit. The sides of the shapes should match.
6. Then, embed the stones in the concrete.
7. After these steps are followed, clean the stains that remains after the task is completed.

• Crazy paving is generally done on a hard surface, normally concrete but it can be done on levelled soft surfaces too. It can be lain over a road which has a compacted base. Use thick stones the width of which should depend on the amount of traffic weight the road has to endure.

• Make use of a plate compactor to level the surface and to press it down after having spread the road base. If the pavement is made beside a property, ensure that the surface slopes down, in the opposite direction to the exterior wall. The installation of a strip drain can also be initiated to prevent flooding from rainwater in the house.

Crazy Paving

• After the pavement is laid, fill the gaps with stone chips that are small or trimmed.

• Then, set the mortar. This holds the stones in place. The mortar is basically a mixture of sand and cement in the ratio three is to one. The cement helps to set the motor and the sand provides the required flexibility to it. Then put this mixture and level it on the concrete road and put the stone pieces on it one by one until they are set properly in the right place.

• Once the process is completed, sponge out the excess flags using clean water and do not forget to alter it frequently.

Crazy paving looks effortless and gives an organic vibe. It lasts for a long time and do not get easily damaged. The smoothness is increased depending on the purpose it is going to be used for. There are various types of materials that are used for the purpose, namely stone or slate or concrete. It must be ensured that they are not rectangular in shape but irregular otherwise it would spoil the basic purpose.

It would be the best to pave on a cement path as it helps to hold the stones firmly in place. It is recommended that the wet grout is used for the purpose of sealing the stones. Another challenge in crazy paving is the bedding of the stones.

These were all the important things that you must know about the Crazy Paving. If you liked the post and found it useful, kindly keep coming back to our website for more such posts.